TO-220 Power Resistors Thin Film

Features:
50 Watt at 25°C Case Temperature Heat Sink Mounted.
TO-220 Style Power Package.
Molded Case for Protection and Easy to Mount.
Isolated Case.
Low ohm value.
Applications:
Switching Power Supplies.
Non-inductive design for high frequency.
Pulsing applications.
UPS.
Voltage Regulation.

Derating Curve

Dimensions (Unit: mm)

Electrical Characteristics Specifications

Environmental Characteristics

Test Item	Specification	Test Method
Temperature Coefficient of Resistance	10Ω and above, ±50ppm/°C 1Ω and 10Ω, (±100ppm)/°C	Referenced to 25°C, ΔR taken at +105°C
Short Time Overload	Δ R±0.3%	2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds.
Load Life	Δ R±1.0%	MIL-R-39009,2,000 hours at rated power.
Humidity (Steady State)	Δ R±0.5%	MIL-STD-202F, Method 103B 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours.
Thermal Shock	Δ R±0.3%	MIL-STD-202, Method 107G. -65°C~150°C,100 cycle
Terminal Strength	Δ R±0.2%	MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N.
Vibration, High Frequency	Δ R±0.2%	MIL-STD-202, Method 204, Cond.D.

Lead Material: Tinned Copper.
Maximum Torque: 0.9 Nm.
Without a Heat Sink, When in Free Air at 25°C, the RMG50 is Rated for 3W.
The Case Temperature is to be used for the Definition of the Applied Power Limit.
The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink.
Thermal Grease Should be Applied Properly.

How to Order - TO-220 Power Resistors

RMG

Part Number

RMG

Power Rating (W)
50

Direct Electronics Tech. Co., Ltd.
Taiwan Tel:+886-2-29810109 Fax:+886-2-29887487
China Tel:+86-755-26055363 Fax:+86-755-26055365

POWER RESISTORS